Safety & instructions

A Zipmount is a camera mount — it is not safety equipment and not part of your helmet's protection. It does not improve or replace the helmet's protective function. We are not the helmet maker and have not re-tested the helmet with a mount fitted, so we cannot warrant its certification. Attaching any accessory may affect a helmet's approval — always follow your helmet manufacturer's guidance.

• Choose the mount designed for your exact helmet model and model year.
• Fit it as instructed, through the helmet's own vents with the supplied zip ties. Do not drill, glue or modify the helmet.
• Tighten the zip ties firmly so the mount does not wobble — but do not over-tighten.
• See the full install guide.

• Intended for mountain biking (full-face helmet) only. Not for motorsport, motorcycle or other high-speed use.
• Inspect the mount and zip ties before every ride. Replace worn or damaged parts.
• Replace the mount and zip ties if the mount or the camera took a hit in a crash, even if they look intact. A crash where neither is hit does not weaken the mount.
• A camera adds mass and a protrusion to the chin bar — be aware of this, especially in a crash. Use only a lightweight action camera (GoPro / DJI / Insta360 class).
• The regular mount is PETG and PRO is carbon-fibre-reinforced PA12 (PAHT-CF). Both handle the heat of a hot car.
• Always use an intact, correctly fitted, standards-compliant helmet according to its manufacturer's instructions.

The regular mount is 3D-printed from PETG and PRO from PAHT-CF; both ship with UV-resistant zip ties. Clean with a damp cloth; do not use solvents. Check its condition regularly.

• Before every ride, check that the part is fitted tight. Replace a part that is cracked or otherwise damaged.
• The material is listed in the specs on the product page. Clean with a damp cloth; do not use solvents.

If anything about fitting or use is unclear, get in touch before you ride: info@zipmounts.com.